The use of chain stainless steel conveyor belt drive sprockets

Use of chain stainless steel loading conveyor belt drive sprocket

Stainless Steel Drive Sprocket

The tightness of the sprocket should be appropriate, if it is too tight, it will increase the power consumption of the loading conveyor, and the bearings will be easily worn; if it is too loose, the sprocket will easily jump and fall off the chain. The degree of tightness of the sprocket is: lift or press down from the middle of the sprocket, which is about 2%-3% of the center distance between the two sprockets. The stainless steel transmission sprocket should be installed on the shaft without swinging and skewing. In the same transmission assembly, the end faces of the two stainless steel transmission sprockets should be in the same plane. When the center distance of the sprockets of the chain loading conveyor belt is less than 500 mm, the deviation can be 1 mm; when the center distance of the sprockets is more than 500 mm, it can be Deviation of 2 mm. There should be no friction on the flanks of the sprocket teeth. If the two wheels are offset too much, it is easy to cause detachment and accelerated wear. Pay attention to check and adjust the offset when replacing the stainless steel drive sprocket.

After the stainless steel transmission sprocket is severely worn, a new sprocket should be replaced to ensure good meshing. Otherwise, there will be poor meshing and accelerated wear of the new sprocket. After the tooth surface of the stainless steel transmission sprocket is worn to a certain extent, it should be turned over in time for use (referring to the sprocket used on the adjustable surface) to prolong the use time. The stainless steel transmission sprocket is too long or elongated after use, so it is not easy to adjust, and the chain links should be removed according to the actual situation. The chain link of the stainless steel conveyor belt should pass through the back of the sprocket, and the opening of the locking piece should be opposite to the direction of rotation. The stainless steel transmission sprocket should be filled with lubricating oil in time during work. The lubricating oil enters the fitting clearance of the rollers and the inner sleeve. belt sprockets cannot be mixed with some new sprockets, otherwise impacts will easily occur in the transmission. When the stainless steel conveying machine is stored for a long time, the conveying sprocket should be removed and cleaned with kerosene and diesel oil, then coated with engine oil or butter and stored in a dry place.

Ningbo YiFan Conveyor Equipment Co.，Ltd has created its reputation on a commitment to manufacturing high-quality products and services while satisfy the needs of customers.

For more advice on tips, please visit our website YiFan Conveyor Equipment. Usisite kuwasiliana nasi ikiwa una nia.

If we avoid overselling flexible conveyor system container loading machine and capabilities, you gain credibility and earn trust. Hatukutaka kuhatarisha upendeleo wetu uliokita mizizi wa unyenyekevu.

YiFan Conveyor focuses on three key elements—process, people, and technology—the authors found that people of two seemingly opposite cultures are able to work together in a project-based environment to complement each other and reap mutual benefits for a win-win result.

With this competency, Ningbo YiFan Conveyor Equipment Co.，Ltd provide high technology and assist customers to create added value and contribute to the development of producing gravity roller conveyor