The chain conveyor is fixed on the traction chain

The chain conveyor is mainly a conveyor that uses a series of slats fixed on the traction chain to transport materials in the horizontal or inclined direction. This is a single piece of steel plate hinged into an endless belt as the traction and bearing surface of the loading conveyor, with transverse spacers placed in the tank box to drive the belt to scrape and transport the materials out by the spacers.

This is composed of mechanism, tensioning device, traction chain, slats, driving and redirecting sprocket, frame and other parts. It has been widely used in metallurgy, coal, chemical industry, electric power, machinery manufacturing and other industrial sectors of the national economy. The conveyor has a wide range of applications. Except for materials with particularly high viscosity, general solid materials or finished objects can be conveyed by this machine, and the conveying capacity is large. And the strength of the traction chain is high, and the chain plate loading conveyor can be used for long-distance transportation. This can flexibly arrange the transmission line. What are the applications and characteristics of roller conveyors

The chain conveyor mesh belt has good corrosion resistance, wear resistance, high temperature resistance and other properties. It has satisfactory resistance to cold shrinkage and fracture under negative temperature and high temperature. Reasonable design, compact structure, many specifications, convenient installation, reliable operation and so on. Widely used in electronic industry, glass factory, instrument drying, rubber factory, etc. Scope of application of belt conveyor, and equipment introduction

I. Precautions before commissioning of chain loading conveyor

1. All connecting bolts should be tightened .

2. There should be no debris left in the equipment.

3. Add lubricating oil to the oil nozzle of each moving part, and add lubricating oil to the reducer according to the instructions.

4. The electrical wiring should be checked comprehensively.

Second, precautions when debugging the chain conveyor

1. After the equipment system is fully checked and confirmed to be correct, the equipment should be emptied first. Load debugging work, after all the faults are eliminated, do a no-load running-in test for 10-20 hours, and finally carry out the load test vehicle.

2. Whether the gear teeth of the driving sprocket, the tail wheel and the traction chain work in a normal meshing state. If the difference is large, screw the bearing seat bolts of the driving sprocket and the passive sprocket, and adjust the centerline position of the driving sprocket and the passive sprocket slightly.

3. Adjust the tensioning device so that the initial tension of the second traction chain is balanced and moderate. If the initial tension is too large, the power consumption will increase; if it is too small, it will affect the normal meshing of the sprocket and the traction chain, increasing Instability in operation.

4. Check whether all walking rollers rotate flexibly. If there are any phenomena such as jamming and sliding, replace or troubleshoot immediately.

5. During operation, if the moving components are stuck and forced mechanical friction, the chain conveyor should be removed immediately.

3. Precautions for normal operation of the chain conveyor after commissioning

1. During operation, uniform feeding should be achieved, and the feeding block should be should be controlled within the specified range.

2. It is not advisable to stop and start the vehicle when it is fully loaded, and it is not possible to reverse the vehicle.

3. Regularly check the bolt connection of the groove bottom plate and the chain plate, if any looseness is found, it should be dealt with in time.

4. The tension of the traction chain should be suitable for the degree, and it should be checked frequently during operation, and the adjusting screw of the tensioning device should be adjusted if necessary.

5. The reducer must be replaced with new lubricating oil after 7-14 days of operation, and it can be replaced once every 3-6 months according to the situation.

6. Lubricant should be injected into each lubricating point in time.

Ningbo YiFan Conveyor Equipment Co.，Ltd is different from other companies as we provide timely and unique services to our respected clients.

With all the pros and cons of different in mind, click YiFan Conveyor Equipment to learn more about and decide which gravity roller conveyor option is best for your case.

We sells flexible conveyor system and focus on operational procedure and manufacturing facilities container loading machine.

Do you want to find a provider to get your gravity roller conveyor problem settled? If so, we suggest that you give a shot to Ningbo YiFan Conveyor Equipment Co.，Ltd. Visit YiFan Conveyor Equipment to learn more and contact us.