Gear motor transportation equipment maintenance and function

Deceleration motor reducer and integration of body, is the power source of the transmission device, is an important part of the conveyor. Commonly used for low speed high torque transmission line, the motor internal combustion engine or other high speed operating of power by the number of teeth on the input shaft of the reducer less close on the output shaft of the gear of big gear reduction to achieve the purpose, to a few common reducer are gears to achieve the ideal effect, the principle of the same size gear gear ratio, is the speed ratio. Here jin dust under the machinery to introduce the daily maintenance and function of the gear motor, speed reducer of the daily maintenance of 1, regular check installation base, seals, drive shaft is normal. 2, such as normal use need to check the oil level of the lubricating oil, lubricating oil should be less than the maximum temperature of 85 degrees. Oil [litres of abnormal changes, the phenomenon such as abnormal noise, must stop the machine immediately to check, troubleshooting, may continue to use. 3, shall not gravity hammer reducer shell, so as to avoid damage. 4, replace the new accessories must be the running-in and load experiments before formal use. 2, 1, the role of the reducer reducer and at the same time reduces the load moment of inertia, moment of inertia of the decrease of reduction ratio of the square. You can have a look at general motors has a inertia value. 2, slow down at the same time improve the output torque, torque output ratio according to the motor output by reduction ratio, the amount of the note can't exceed the speed reducer of peak torque.