Each stainless steel conveyor has its own stainless steel conveyor set

Each stainless steel conveyor has its own stainless steel conveyor device, which is commonly known as the motor and motor. Their role is to serve as the source of power for stainless steel conveyors. So what is the stainless steel conveyor of the belt conveyor ? Are there any specific requirements? Let's take a look at it with the editor:

The stainless steel conveyor is the source of power for the belt conveyor. The motor drives the transmission roller to rotate through the coupling and reducer, and the conveyor belt moves by relying on the friction between the roller and the loading conveyor belt. Generally speaking: a simple stainless steel conveyor with a small amount of equipment is a good stainless steel conveyor. However, stainless steel conveyors may sometimes be equipped with some special-purpose equipment to improve the starting and braking performance of the conveyor. If necessary, there are also brakes and backstops on the stainless steel conveyor. The basic requirements of the belt conveyor system for stainless steel conveyors are as follows:

A.

stainless steel conveyor

It has good starting performance and a large starting torque to enable the conveyor to start with load.

B. During the starting process, there is a sufficiently small and reasonable acceleration to reduce the dynamic load of each load-bearing part, avoiding the slipping and spilling of materials on the conveyor belt, the slipping of the conveyor belt and the roller, and the tensioning device caused by excessive inertial force excessive travel. Theoretically, it is required that a constant starting process should be maintained under different cargo conditions.

C. Provide low-speed operation mode. In order to inspect the belt or prevent freezing, sometimes the conveyor must be continuously operated at a low speed, generally 10~12% of the design speed.

D. The stainless steel conveyor must prevent the power and torque delivered to the conveyor from exceeding the safety limit, so as to ensure that the overloaded conveyor automatically stops and avoids catastrophic accidents.

e. In the case of using multiple drives, the load of each motor should be guaranteed to avoid overloading of one or several drives and parts of the conveyor.

f. The impact on the power grid is small when the motor starts, which can make the motor start without load.

g. The stainless steel conveyor should have good controllability, control the speed, acceleration and deceleration when starting and stopping.

h.

Zhejiang stainless steel conveyor

The device should have high transmission efficiency and low energy consumption.

i. Try to make the motor no-load start, stagger the starting time of each motor when starting; reduce the number of motor starts, and if possible, it is not necessary to stop the motor when the conveyor stops.

j. Equipped with a controller including self-monitoring and self-diagnosis functions.

Ningbo YiFan Conveyor Equipment Co.，Ltd is devoted to satisfy our customers with a wide array of the finest using experience.

Visit Ningbo YiFan Conveyor Equipment Co.，Ltd for the best in supplies: YiFan Conveyor Equipment.

Loyalty programs provide an opportunity to learn the preferences of customers and design communication strategies that will resonate with flexible conveyor system.

The container loading machine-type gravity roller conveyor is poised to lead the container loading machine market