Belt and screw conveyors are versatile conveying equipment

Belt conveyors and screw conveyors are widely used and are the most popular conveying equipment among the people. Their advantages are simple operation and low maintenance cost.

Operation rules of belt conveyor

1. Turn on the main power switch , Which is the best light conveyor, check whether the power supply of the equipment is normally fed and whether the power indicator light is on. Proceed to the next step after normal operation.

2. Turn on the power switch of each circuit. Under normal conditions, the equipment does not operate, the running indicator of the belt conveyor is not on, and the power indicator of the inverter and other equipment is on. , the display panel of the inverter shows normal (no fault code display). (News Recommendation: Preventive Measures for Belt Broken Accidents)

3. Start each electrical equipment in sequence according to the process flow, and then proceed after the previous electrical equipment starts normally. Startup of the next electrical device. In the operation of the belt conveyor, the price of the light loading conveyor must comply with the regulations of the items in the design of the conveyed items, and the Nanhai light conveyor must comply with the design capacity of the belt conveyor.

4. Secondly, it should be noted that all kinds of personnel should not touch the moving parts of the belt conveyor, and non-professionals should not touch electrical components, control buttons, etc. at will.

How to deal with the screw conveyor pulley?

1. The gap between the inner wall of the screw loading conveyor and the two sides of the spiral surface should be equal, the tolerance is ±2mm, and the tolerance between the bottom and the gap is ±2mm .

2. The clearance between the end face of the hanging bearing and the inner surface of the connecting flange shall not be less than 1.5mm when the diameter of the screw is ф150～ф250mm, and when the diameter of the screw is ф300～ф600mm, The gap should not be less than 2mm. (News recommendation: The following points should be paid attention to when selecting a screw conveyor)

3. During the no-load test run, the design of the light-duty conveyor, if the bearing is found to be leaking If the oil phenomenon occurs, the bearing should be folded down, and the tightness of the spring in the sealing ring should be adjusted until it does not leak.

4. The suspension bearing of the screw conveyor should be installed at the midpoint of the connecting shaft, and the gap between its end face and the end face of the two spiral tube shafts should be greater than 10mm (ф150～ ф400mm) and 20mm (ф500～ф600).

Ningbo YiFan Conveyor Equipment Co.，Ltd promises that we will manufature our products in accordance with the strictest quality standards.

Exceed our customers’ expectations by being the leading provider of safe, responsive, value-added services in the flexible conveyor system industry.

To offer abundant options of product is an important factor to a company, such as gravity roller conveyorcontainer loading machine to afford high-quality products for customers.

The best way to determine the ideal strategy of flexible conveyor system is to continually test and refine your selling and marketing tactics