YiFan talks about the reasons for the failure of the roller conveyor

The author of YiFan will share with you today the running situation of roller conveyor

Condition. The roller conveyor is professionally used for the transportation of all kinds of boxes, bags, pallets and other goods, and can transport a single piece of heavy material

Or bear large shock loads. Due to the gap between the roller and the roller in the roller conveyor, the conveying is small.

When an item is shipped, it must be transported by means of a pallet. The main body of the conveyor is mainly composed of driving rollers, racks and brackets.

Combination of

, drive and other parts, it has large conveying capacity, fast speed and light operation, which can realize multi-variety collinear shunt conveying.

With the development of science and technology, roller conveyors are used in various economic fields in China.

The application of

makes today's production enterprises generally choose to use conveying equipment to improve production operations. Simultaneous roller conveying

The machine can also adjust the parts of the conveying equipment according to the needs of the production of automated production materials, as well as the different needs of logistics and transportation.

Develop, design and manufacture. The design structure of the roller conveyor is very simple, and the safety, reliability and performance of its operation is better than that of the roller conveyor.

Higher, it is also very convenient to use and maintain in daily production operations. However, there are also transported materials over a long period of time.

Some problems cause the roller loading conveyor to be unable to operate normally, so at this time, the problem can be clearly identified

Where it is is particularly important and urgent, no matter it is any machine, it is impossible to work endlessly, every machine

When there are failures, the author of YiFan below summarizes a few of the reasons why the roller conveyor can not be

reasons sufficient for normal operation.

1. The brakes are damaged, resulting in the inability to perform normal parking;

2、制动命令无法进行传递，这一般是操作制动开关损坏；

3、动力传递系统未能及时切断动力；

4、气

Abnormal pressure, generally manifested in air leakage or blockage of the trachea;

5. The friction belt is loose or the friction factor is reduced

;

6. The wiring method of the stator winding may be incorrect, the insulation of the winding to the ground is aging, and the starting voltage caused by

The sound is too loud due to the large unbalanced flow, which will cause the protection device to act and cut off the power supply;

7.

Sometimes the drum motor makes a strong noise and generates local heat. This is mainly because the starting torque of the AC motor is small, and it cannot start when it is loaded.

, the motor stops when the load increases

8. Another is that the AC motor has no starting torque, or cannot be

Enough to start up and make abnormal sounds. Roller conveyor technology finishing release.

If you

If you have any questions after reading the above, please call our hotline and sincerely help you solve your doubts. learn

For more information on rollers, unpowered roller conveyors and loading conveyor lines, please visit our official website.

This is an internationally recognized standard which acts as a form of guarantee that everything Ningbo YiFan Conveyor Equipment Co.，Ltd does is managed to the highest quality standards.

Ningbo YiFan Conveyor Equipment Co.，Ltd will make a healthy profit for its owners and provide a rewarding work environment for its employees.

There are many advantages associated with .

By balancing the efficiencies of new technologies with the personal touch of highly trained and motivated professionals, Ningbo YiFan Conveyor Equipment Co.，Ltd is able to deliver solutions and services that exceed our customers’ expectations. We thereby earn their loyalty.

Ningbo YiFan Conveyor Equipment Co.，Ltd has great reputation with an excellent selling record for fulfilling customer's satisfaction.