What are the steps when the mesh belt conveyor is reinstalled or replaced?

The stainless steel mesh belt will be damaged when the mesh belt conveyor runs for a long time or runs abnormally. At this point, whether replacing or reinstalling the mesh belt, it is recommended that the following procedure be followed.

1. Turn off all power, remove the protective cover, loosen the motor mounting bolts, and then move the motor to loosen the loading conveyor belt, so that it is easy to remove the damaged conveyor belt.

2. If the removed mesh belt is abnormally worn, it means that there is a problem with the transmission device, and then select a suitable mesh belt for pre-operation replacement.

3. The mesh belt loading conveyor manufacturer should be cleaned first. Note 1. Do not use sandpaper to scrub oil or dirt; 2. Do not choose to soak directly or clean with detergent. Both of these methods will damage the stainless steel mesh belt.

4. Before replacing, make sure the conveyor belt is dry.

5. Check the protection devices such as belt deviation prevention and transmission protection, and immediately adjust the protection for washing deviation and wear.

6. Install the stainless steel conveyor belt mesh belt on the conveyor, then first adjust the center distance of the transmission device, and use the tension measuring instrument to test the mesh belt until the appropriate tension is reached. Then tighten all the bolts of the motor. If tightened, the conveyor may not work.

7. After the replacement of the conveyor belt is completed, run the conveyor to check the status after replacement, whether there is noise and vibration, etc. , to stop immediately, check the motor and bearings.

container loading machine are required in the manufacture of almost every product and container loading machine gravity roller conveyor is one of the most common machines.

All of the long-term strategies and short-term actions of YiFan Conveyor will be molded by a set of core values that are shared by each and every associate.

Ningbo YiFan Conveyor Equipment Co.，Ltd's flexible conveyor system are sturdy, easy to operate, friendly work machines that deliver high-quality container loading machine for container loading machine purposes.

Unlike the container loading machine, the is more flexibly used in accasions where container loading machine .