Why does the belt conveyor scatter materials?

Many times when the belt loading conveyor is conveying materials, it is prone to falling or stripping, resulting in insufficient amount of materials to be conveyed. Then what is the cause? In many cases, the bucket machine is unstable, so why the machine will What about unstable factors? The following editor will do a specific analysis for you and hope to help you.　　　　 The blanking of the belt loading conveyor is a common question, and the reasons are also various. But the main point is still to strengthen the usual protection and conservation.　　　　 1. Blanking at the transfer point The blanking at the transfer point is mainly in the blanking hopper, guide trough, etc. For example, the belt loading conveyor is seriously overloaded, and the PVC skirting board of the Bandförderer 's guide groove is damaged.　　　　 If the steel plate at the guide groove is planned to be far away from the belt, the PVC skirt board will be relatively long, so that the material will be flushed out of the guide groove. The above situation can be solved by controlling the transportation capacity and strengthening protection and maintenance.　　　　 2. The concave part of the belt is suspended when it is suspended. When the radius of curvature of the recess is small, the belt will hang in the air. At this time, the belt groove conditions change. Since the belt has left the grooving roller set, the grooving angle usually becomes smaller, causing some materials to fall. Therefore, in the planning stage, a larger radius of curvature of the recess should be used as much as possible to prevent this situation.　　　　 For example, in mobile mechanical loaders and stacker-reclaimer equipment, in order to shorten the trailer, the concave part here is planned as a non-arc transition zone. When a smaller belt width is selected, it is easier to spread the material.　　　　 3. Unloading when the belt is running. The whiteness of the belt during operation is because the height of the two edges of the belt has changed during operation. One side is higher and the other side is lower. The material is scattered from the underside. The treatment method is to adjust the deviation of the belt.

Ningbo YiFan Conveyor Equipment Co.，Ltd devises a regular, independent, transparent and objective assessment mechanism to evaluate country performance.

All you women out there looking for amazing to dazzle the world try Ningbo YiFan Conveyor Equipment Co.，Ltd latest collections at YiFan Conveyor Equipment. Try it!

Unlike the container loading machine, the is more flexibly used in accasions where container loading machine .

There are so many factors that businesses have to weigh when producing flexible conveyor system, and we are not going to pretend to grasp all of them.

gravity roller conveyor, is an alternative product for container loading machine to investors and consumers who are passionate about our products or services