The stainless steel conveyor is the source of power for the belt conveyor.

    Each stainless steel conveyor has its own stainless steel conveyor device, which is commonly known as the motor and motor. Their role is to serve as the source of power for stainless steel conveyors. So what is the stainless steel conveyor of the belt conveyor like? Are there any specific requirements? Let's take a look at the editor of the stainless steel conveyor manufacturer to find out:

    The stainless steel conveyor is the source of power for the belt conveyor. The motor drives the transmission roller to rotate through the coupling and reducer, and the conveyor belt moves by relying on the friction between the roller and the conveyor belt. In general: a simple stainless steel conveyor unit that uses a small amount of equipment is a stainless steel conveyor unit. However, stainless steel conveyors may sometimes be equipped with some special-purpose equipment to improve the starting and braking performance of the conveyor. If necessary, there are also brakes and backstops on the stainless steel conveyor. The basic requirements of the belt conveyor system for stainless steel conveyors are as follows:

    a. The stainless steel conveyor should have good starting performance and a large starting torque so that the conveyor can start with load.

    b. Have a sufficiently small and reasonable acceleration during the starting process to reduce the dynamic load of each load-bearing part, and avoid slipping and spilling of materials on the conveyor belt, slippage and tension of the conveyor belt and roller caused by excessive inertial force Excessive stroke of the device. Theoretically, it is required that a constant starting process should be maintained under different cargo conditions.

    c. Provide low-speed operation mode. In order to inspect the belt or prevent freezing, sometimes the conveyor is required to run continuously at a low speed, generally 10~12% of the design speed.

    d. The stainless steel loading conveyor must prevent the power and torque delivered to the conveyor from exceeding the safety limit, so as to ensure the automatic shutdown of the overloaded conveyor and avoid catastrophic accidents.

    e. In the case of using multiple drives, the load of each motor should be guaranteed to avoid overloading of one or several drives and parts of the conveyor.

    f. The impact on the power grid is small when the motor is started, and the motor can be started without load as much as possible.

    g. The stainless steel conveyor should have good controllability, control the speed, acceleration and deceleration when starting and stopping.

    h. The stainless steel conveyor should have high transmission efficiency and low energy consumption.

    i. Try to make the motor start without load, and stagger the starting time of each motor when starting; reduce the number of motor starts, and if possible, it is not necessary to stop the motor when the conveyor stops.

    j. Equipped with a controller including self-monitoring and self-diagnosis functions.

    The above content is organized by the stainless steel conveyor manufacturer!

is frequently used by people in daily life since it can improve container loading machine and container loading machine.

Knowing these basics of is every essential. But if you don't know how to choose the proper for your specific need, let Ningbo YiFan Conveyor Equipment Co.，Ltd experts be your guide. Enquire us at YiFan Conveyor Equipment.

Ningbo YiFan Conveyor Equipment Co.，Ltd offer various lines of products in line with international standards along with professionals who can offer suitable solutions pertaining to the existing problem in container loading machine gravity roller conveyor.