Do you know what are the 10 steps of chain conveyor operation?

    Chain conveyors are suitable for low speed, heavy load and high temperature conditions. Compared with gears, it can be used in occasions where the center of the two shafts is farther away. Chain conveyor manufacturers speak

Chain

    1. Those who have passed the examination and obtained the operation certificate are allowed to use the chain conveyor . Operators must strictly abide by the relevant safety and shift system.

    2. Check the transmission part and the wheel before opening the chain conveyor. The chain plate and safety protection device should be firm and reliable.

    3. Check that the lubrication of each part should meet the specified requirements, and if it does not meet the requirements, add lubricating oil (grease) according to the 'five rules' for equipment lubrication.

    4. Boot sequence

    (1) Open the receiving equipment or device first.

    (2) Start the chain conveyor.

    (3) Start the feeding device or equipment.

    5. The chain plate conveyor should feed materials evenly during operation. Too much material is easy to block and flow out of the machine, causing chain plate derailment accidents.

    6. The tightness of the chain plate should be checked frequently, and it can be adjusted at any time if necessary. The deflection phenomenon of uneven force is not allowed to occur.

    7. If any failure occurs during the operation of the chain conveyor, it should be stopped immediately for inspection and repair.

    8. When shutting down, the feeding equipment or device should be stopped first, and the material on the chain conveyor should be cleaned before shutting down.

    9. Keep the chain conveyor clean and hygienic.

    10. Carefully fill in the relevant records according to the regulations.

    The chain conveyor is one of the important components in the transportation industry, so the maintenance of the chain loading conveyor is particularly important. Next, I will introduce the maintenance items of the chain conveyor.

    After one use for three months, drain the engine oil in the reduction box of the head of the chain-plate conveyor, then clean the inside of the reducer with diesel and gasoline, and then add new lubricating oil to the middle of the observation window.

    The chain is unbalanced during the conveying process, the noise is increased, and there are faults such as crawling. You can open the tail sealing plate and add butter or thicker lubricating oil to the chain.

It is forbidden to enter the motor with water, and to add diesel oil and liquid organic compounds to the motor, because this will damage the motor insulation and other faults.

For the study, researchers defined YiFan Conveyor as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.

If you would like to solve your container loading machine problem by adopting a . Ningbo YiFan Conveyor Equipment Co.，Ltd, an experienced and professional peovider having won high reputation globally will be your bast choice. You won't be disappointed

Ningbo YiFan Conveyor Equipment Co.，Ltd are used to coming up with solutions while think about problems, also expressing the whole idea individually