How to solve the failure and degumming of the belt conveyor roller

09-07 16:13:47 How to solve the belt conveyor roller failure and degumming? The main reasons for the belt conveyor roller brake failure: whether the air pressure is abnormal, whether the air pipe is leaking or blocked; whether the brake pads are damaged; both sides of the roller Whether the brake disc of the brake is defective; whether the brake switch system is operated to make the transmission of the brake command unsmooth; whether the power transmission system blocks the power in time; for the belt friction brake, check whether the friction belt is loose or the friction factor is reduced, Should be adjusted or replaced. Belt conveyor roller degumming: too small a wrap angle and too small friction coefficient will cause the rubber surface of the roller to degummed. From the analysis of belt slip, the smaller the wrap angle of the roller, the smaller the friction coefficient, the greater the small tension of the conveyor belt deviation point, and the easier the tape Skidding. In the design, the wrap angle between the roller and the tape should be appropriately increased. During the production process, try to avoid the mixture of water and materials attached to the tape to reduce the coefficient of friction. The tape tension is too small and the rubber surface of the tape roller is degummed. The belt conveyor with heavy hammer tension can be solved by adding the weight of the heavy hammer. It should be added until it does not slip, but it should be noted that it should not be added too much. To avoid unnecessary excessive tension of the tape and reduce the service life of the tape; the belt of the belt loading conveyor using spiral tensioning device and hydraulic tensioning device slips, and the tension can be increased by adjusting the tensioning stroke However, sometimes the tensioning stroke is not enough and the tape is deformed. At this time, the tape can be cut off and then vulcanized again. The failure of the cleaner leads to the degumming of the roller. The cleaner is used to clean the materials stuck on the loading conveyor belt. The failure of the cleaner function will cause the material adhering to the conveyor belt to enter between the roller and the tape, causing wear between the material particles and the tape, resulting in the degumming of the rubber surface of the roller and reducing the service life of the tape.

container loading machine gravity roller conveyor processes have been widely used to produce container loading machine such as container loading machine, container loading machine, and container loading machine etc.

To build customers value by delivering high-quality products, services and solutions in innovative and cost effective ways. Ningbo YiFan Conveyor Equipment Co.，Ltd will realize this mission by setting the highest standards in service, reliability, safety and cost containment in our industry.

We want to be careful and deliberate about developing YiFan, from the platform we choose, to the way we approach it, to the methods we use.

Ningbo YiFan Conveyor Equipment Co.，Ltd provides innovative technology and prompts our customers to know the development of our producing flexible conveyor system.