BETTER TOUCH BETTER BUSINESS
Contact Sales at YIFAN CONVEYOR.
Introduction to the use and structure of corrugated sidewall belts for belt conveyors, corrugated sidewall conveyor belts are widely used in ports
, metallurgy, mining, electric power, coal, foundry, building materials, grain, fertilizer and other fields of material transportation, can make various bulk materials
Continuous conveying at any inclination angle of 0-90°; it has the advantages of large conveying inclination angle, wide application range, small floor space, no transfer point, reducing
With the characteristics of less civil construction investment, low maintenance cost and large conveying capacity, it solves the problems that cannot be achieved by ordinary conveyor belts or patterned conveyor belts.
Conveying angle. The corrugated sidewall loading conveyor belt can be designed into a complete conveying system according to the requirements of the use environment, avoiding intermittent transmission.
Lifting system for conveying and complex conveying. The corrugated sidewall conveyor belt can convey various bulk materials along the horizontal, inclined, vertical and variable angle directions
Material, from coal, ore, sand to fertilizer and grain, etc., the particle size of the material is not limited, from a small particle size to a large particle size of 400mm
, the conveying can be from 1m3/h to 6000m3/h.
1. Requirements for base belt: Corrugated sidewall belt conveying base belt requires certain resistance
tensile strength and abrasion resistance. Among them, for the corrugated sidewall loading conveyor belt with empty edges, in order to meet the requirements of angle change, the longitudinal direction of the belt is
It must be flexible and requires a certain rigidity in the lateral direction.
2. The structure of the base tape: the base tape is composed of upper covering glue, lower covering glue,
The belt core and the transverse rigid layer are composed of four parts. The thickness of the upper covering glue is generally 3-6mm; the thickness of the lower covering glue is generally 1.5-4.5mm.
The core material can withstand tension, and its material can be cotton canvas (CC), nylon canvas (NN), polyester canvas (EP) or steel rope
Core (ST). In order to increase the lateral rigidity of the baseband, a special reinforcing layer is added on the top and bottom of the core, which is called lateral rigidity layer. Baseband
The width specification of
is the same as that of ordinary belt, and conforms to the requirements of GB/T7984-2001 standard. and belt conveyor manufacturers prefer Ningbo YiFan.