The operation of the belt line
by：YiFan Conveyor 2020-09-24
Before running the belt line, first of all, to confirm the belt line equipment, personnel, goods are to be delivered is in a state of safety in good condition; Then inspect the normal movement part no foreign body, check all the electrical wiring is normal, normal to the belt line in operation. Finally, check the power supply voltage and rated voltage of equipment difference less than & plusmn; 5%. In the running of the belt line, must carry out the following operations: 1. Close the total power switch, check whether the equipment into the power supply is normal and the power indicator light is bright. The next step after normal operation. 2. Close the circuit of the power switch, check whether normal. Under normal condition is: the equipment is not action, belt line running light is not bright, the equipment such as power indicator of the converter, the inverter display panel display is normal ( Trouble-free code display) 。 3. According to the technological process, in turn, start the electrical equipment, an electrical equipment on the startup after normal ( Motor or other equipment has reached the normal speed, normal) Then the next start of electrical equipment. In the operation of the belt line, must abide by the provisions of the items in the design of items to be delivered, comply with the design of the belt line capacity. Second, pay attention to all kinds of personnel shall not touch the moving parts of belt line, non-professional personnel shall not be arbitrarily contact electrical components, controls, etc. Finally, on the belt line in the operation of the inverter can't level after the break, such as to determine the maintenance needs, you must can only be carried out under the condition of the stop frequency operation, otherwise may damage the inverter. Belt line stop running, press the stop button for system to stop all the rear can cut off the total power.