Belt conveyor is now mine, metallurgy, coal and other industries widely used, the installation of
belt conveyor has a certain accuracy requirement, once appear problem can bring needless trouble to production work, let's a detailed introduction of belt conveyor installation detailed steps and matters needing attention.
The installation of belt conveyor can be roughly divided into the following steps.
A, the preparation work before installation, must first be familiar with the drawings.
By looking at the drawings, understand the structure of the equipment, installation form, composition and the quantity, the performance parameters of parts, and other important information.
Then familiar with drawings on important installation size, technical requirements, etc.
If no special installation requirements, the general technical requirements of the belt conveyor is: (
1)
Chassis centerline and longitudinal center line of conveyor should overlap, the deviation is not more than 2 mm.
(
2)
Frame of the center line of the straightness deviation in any 25 meters in length should not be greater than 5 mm.
(
3)
Frame leg on the ground of the verticality deviation should not be more than 2/1000.
(
4)
Middle frame spacing of allowable deviation of plus or minus 1.
5 mm, 2/1000 of the height difference should not be greater than the spacing.
(
5)
Drum the center line of the transverse and longitudinal center line of conveyor should overlap, the deviation is not more than 2 mm.
(
6)
With longitudinal center line of the vertical conveyor roller axis should not be greater than 2/1000 of the deviation, horizontal windage should not be more than 1/1000.
Because during the project on outsourcing of equipment can't be on the construction site.
This requires that pick out the need to install the equipment, complete tag, for lifting.
Before the firm, as far as possible to install all the equipment used to find out, a firm set in place, will save the machine-team fees of the car, and improve the working efficiency.
Equipment after its storing, hoisting in place, and survey and site installation, to eliminate the negative factors influencing the equipment installation.
To live up to our responsibilities to serve and enhance the communities in which Ningbo YiFan
Conveyor Equipment Co.，Ltd works and lives and the society on which we depend.
YiFan provides supreme quality and ultimate using experience.To know in detail about the prices please visit YiFan Conveyor Equipment.
In a nutshell, is actually an ultimate solution for container loading machine and underestimating its value cost you higher than anything else. So grab it before you miss the boat.
The group's Quality Systems Manager (QSM) is responsible for ensuring that Ningbo YiFan Conveyor Equipment Co.，Ltd has in place systems that guarantee quality throughout the Group.
