2014-09-27 09:07:12 1. Trial operation Before leaving the factory, overflow screw conveyors will generally undergo no-load trial operation for no less than two hours to check for problems. After the equipment is installed and debugged on site, a short-term trial operation will be carried out to check whether there are problems. 2. Use and maintenance (1) When feeding, uniform feeding should be carried out to avoid material accumulation and overloading of the equipment. (2) After stopping the feeding, the machine can only stop after the material in the machine has been transported. (3) There should be no hard large pieces of material in the material, so as not to cause the screw to be jammed and damage the loading conveyor
. (4) During the working process of the overflow screw conveyor, the operator should check its working status, whether it is normal, and whether the fasteners are fastened. If there is any looseness, it should be fastened in time. (5) The overflow screw loading conveyor should be regularly lubricated to keep it in a good lubrication state, and the lubricating oil should be replaced regularly to ensure good oil quality. (6) The bearing box should be lubricated with calcium-based grease. Generally, it is sufficient to fill it once a month. (7) Once an abnormality occurs during the operation of the overflow screw loading conveyor, it should be shut down immediately for inspection, and it should not be allowed to work with illness to avoid damage to the machinery and equipment.gravity roller conveyor
has become a standardized way of dealing with container loading machine.
Ningbo YiFan Conveyor Equipment
Co.，Ltd will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
With this competency, Ningbo YiFan Conveyor Equipment Co.，Ltd provide high technology and assist customers to create added value and contribute to the development of producing flexible conveyor system.