You need to pay attention to these when using screw conveyors. The application of screw conveyors is very wide and very simple. So at present, almost all industries that use material transportation will use this equipment. What are the similarities in the process of use? What do we need to pay attention to? Screw conveyor is a conveying equipment used to convey powdery and granular materials. Various bearings work in dust. Therefore, the correct use of screw loading conveyor
under such working conditions is particularly important. So what is the correct way to use the screw conveyor? The screw conveyor can only be started when there is no material and debris in the casing. 1) After starting the motor, observe the current, if it is found to be normal, feed the screw conveyor. 2) When feeding, the feeding speed should be gradually increased to reach the rated conveying capacity, the feeding should be uniform, and the corresponding filling quantity should be maintained, and the intermittent feeding should be avoided as much as possible, otherwise it will easily cause the conveying of the material The accumulated congestion and the overload of the drive device will reduce the service life of the conveyor. 3) In order to prevent metal debris from entering the box of the screw conveyor, causing the bearing of the whole machine to be stuck and twisted, a screen should be added to the feeding port of the screw conveyor. Before starting the machine, cover the box of the screw loading conveyor and not remove it when the machine is running to ensure personal stability and prevent dust from flying. 4) When the screw conveyor is running, always pay attention to the size of the current fluctuation, and solve the cause in time. 5) Feeding should be stopped before the screw conveyor is shut down, and the machine can be shut down only after the material in the casing is completely unloaded. There can be no large and hard materials in the input materials to avoid screw jams and damage to the screw conveyor. 6) The connecting parts of the screw conveyor should not have dust and air leakage, and its tightness should be maintained. 7) When using the screw loading conveyor, you should always check the working conditions of each part of the screw conveyor, pay attention to whether the fasteners are loose, and tighten them in time. Inspection of the screw conveyor before starting up: 1) The remaining oily materials and debris in the tank should be cleaned up if there is any. 2) Whether the tightness of the transmission chain and the tooth clearance of the gear are adjusted properly, and should be adjusted if they are not suitable. 3) Whether the lubricating oil in the bearing is sufficient, otherwise, add new oil to the standard. 4) Is the inlet and outlet unobstructed? If it is blocked, clean it up. 5) Whether there is any loose place between the box body link bolts and the anchor bolts, and the places found to be not tightened should be tightened. Through the introduction of this article, the above problems in the process of screw conveyor transportation are places that we need to pay attention to. Otherwise, it may cause malfunctions during use or affect work efficiency. The most serious ones are dangerous accidents. If it happens, the consequences will be unimaginable, so please remember.flexible conveyor system
is not something to be ignored or taken for granted. It is there to keep your container loading machine comfortable year round. To find a cost effective solution, turn to Ningbo YiFan Conveyor Equipment Co.，Ltd.
If you are looking for container loading machine gravity roller conveyor
, we have plenty of them in our store. We have container loading machine and many others. Visit YiFan Conveyor Equipment to know more.
Ningbo YiFan Conveyor Equipment
Co.，Ltd have found that nurturing relationships with clients by welcoming them to our factory can be valuable to all parties.
Ningbo YiFan Conveyor Equipment Co.，Ltd can assure you that we never compromise on our quality standards and are one of the best in the market at present.