BETTER TOUCH BETTER BUSINESS
Contact Sales at YIFAN CONVEYOR.
Knowledge that should be mastered when using the brake device of the chain conveyor
The chain conveyor can meet the requirements of customers, and there are two modes of transportation, inclined and vertical. The conveying capacity of the loading conveyor is large and the transportation distance is long. Chain conveyors can complete a series of process operations during transportation, so they are widely used.
Brakes for chain conveyors
Sensitive and reliable, the clamping device should be able to independently withstand high wind pressure and not be blown by the wind. The frame installation of the chain conveyor starts from the frame, and the middle frame of each section is installed in sequence, and the tail frame is installed. According to relevant regulations and regulations, the chain conveyor produced by our company adopts the standard top chain as the bearing surface, the motor reducer as the power transmission, and adopts special guide rails for support.
Chain conveyors should have some basic knowledge before use. During use, the chain conveyor should be careful not to touch acid, alkali, oil and water and other pollutants, and keep away from heat sources; avoid long-term direct sunlight, rain and snow; the storage temperature should be kept at - 10c - 40c, and the relative humidity should be kept at 5 % - 80%. In addition, we also need to master the following basic knowledge.
currently using
Mesh belt chain loading conveyor
When using, it is strictly forbidden to connect belts of different types and specifications. In use, prevent folding and press against hard materials. should be used and kept. The direction of conveying materials and the falling speed of materials are consistent with the direction and speed of the conveyor belt.
Copyright © 2024 Ningbo YiFan Conveyor Equipment Co.,Ltd. | All Rights Reserved