Adjust the position of the driving roller and redirecting roller of the small belt loading conveyor
. This is one of the main measures to deal with the deviation of the belt, because a belt conveyor has at least 2 to 5 rollers, and the installation position of all the rollers must be perpendicular to the center line of the belt conveyor length. If the deviation is too large, it will inevitably run Partial. For the head drum, if the belt deviates to the right side of the drum, the bearing seat on the right side should move forward, and if the belt deviates to the left side of the drum, the bearing seat on the left side should move forward. Move the left side bearing seat back or the right side bearing seat back. The impact of the material blanking position at the transfer point. In the case of a failure of the small belt loading conveyor in the coal mine, the material blanking position at the transfer point has a very large impact on the belt deviation, especially when the two belt conveyors are projected on the horizontal plane. The effect is greater when it is vertical, and the relative height of the upper and lower belt conveyors at the transfer point should usually be considered. If the relative height is lower, the horizontal velocity component of the material is greater, and the lateral impact on the lower belt is also greater. At the same time, the material is difficult to center, which will bias the material on the cross section of the belt and eventually cause the belt to deviate.
The , essentially perfected by container loading machine, is one of the first home appliance to be widely distributed.
Best in Ningbo YiFan Conveyor Equipment
Co.，Ltd can handle all sorts of container loading machine with good efficiency while providing ensured quality. Here you can find so as to solve your container loading machine issues.Go to YiFan Conveyor Equipment to get fixed.
Ningbo YiFan Conveyor Equipment Co.，Ltd, a manufacturer of gravity roller conveyor
, might emphasize less hassle or less wasted time rather than emphasizing reliability or quality.
Your co-workers, investors and clients have busy schedules, and it can be hard to get everyone in the same place at the same time for flexible conveyor system. So, it is important to create a connection between company and clients.