BETTER TOUCH BETTER BUSINESS
Contact Sales at YIFAN CONVEYOR.
Chain loading conveyor, this kind of conveyor will also encounter various problems during use, but the key is, once it fails, how should we deal with it? That is to solve it? So next, us
Chain loading conveyor manufacturer
Let's talk about this aspect, I hope it can be helpful to everyone.Fault problem one: the chain plate is damaged
The main reason is that the chain plate is excessively worn, bent and deformed, and sometimes cracked. The main reasons are:
1. The bottom plate of the tank is not laid well, or the bending angle exceeds the design requirements.
2. The joint of the bottom plate of the tank is not good, or it has local deformation.
3. The volume of the material is relatively large, causing it to be squeezed during transportation, or stuck, causing the chain to suffer a great impact.
4. The long-term overload operation of the chain plate makes it damaged.
Fault problem 2: The power sprocket and the transmission chain cannot be meshed normally, and then the phenomenon of 'jumping teeth' occurs
The main reasons for this problem are:
1. The wear of the power sprocket is serious, or impurities are brought into it.
2. The tightness of the chain is inconsistent, or the chain plate is skewed or the spacing is too large.
3. The machine head is not installed properly, or the verticality between the machine head and the chain does not meet the requirements.
4. The gap between the power sprocket and the drive shaft is too large, causing the power sprocket to tilt or shake.
The above content is organized by chain conveyor manufacturers. If you want to know more about chain conveyors, please pay attention to this site!
Copyright © 2024 Ningbo YiFan Conveyor Equipment Co.,Ltd. | All Rights Reserved