BETTER TOUCH BETTER BUSINESS
Contact Sales at YIFAN CONVEYOR.
The screw conveyor has a wide range of uses and a wide range of materials to be conveyed. It can convey powder, granular and
And small block materials, because the use environment of the screw conveyor is generally dusty, the bearing of the conveyor will be in the long-term
Dust will aggravate its wear and tear, so it is necessary to regularly maintain and lubricate the machinery so that the conveyor can work better.
The mechanism of the screw conveyor can extend into all kinds of industrial and mining materials. The number of cleaning can reduce the amount of cleaning, with continuous conveying and cleaning
Function, the ability to maintain a stable close to the rated productivity when the machine is turned on, and can reach 50% of the rated productivity
5 to 70% while the average efficiency of other conveying equipment is only 40 to 50%. This balanced working nature is very important for the matching of the rear conveying system; various mechanical continuous The energy consumption of conveyors is smaller than that of grab conveyors. generally
All can realize airtight conveying, and the discharge point in the conveyor is also easy to be closed.
Reducing the height of the transfer point or taking other dust removal measures can also greatly reduce the pollution of dust to the environment, and can realize continuous transmission
Because of the continuous action, the conveying operation has little vibration and noise.
Pay attention when the screw conveyor conveys materials
matters; when starting to feed, gradually increase the feeding, and evenly feed, do not add to the rated amount of the equipment at once, otherwise it will
The blockage of the machinery and equipment of the machine and the overload of the driving device also have a certain influence on the life of the conveying equipment. Material not available
Hard bulk materials, otherwise the screw will be stuck, causing certain damage to the screw conveyor.
Do not feed at startup, etc.
Feeding is carried out after starting, and the loading conveyor should be started without load. Before the screw conveyor stops, stop feeding and wait until the
After the material loading conveyor has finished conveying, stop the operation of the conveying equipment. It is necessary to regularly check the components in the equipment, such as tight
Whether the firmware is loose, if it is loose, it should be tightened in time, and preventive measures should be taken in advance. cannot be removed during running time
Cover. In order to avoid personal harm, it is also necessary to frequently add lubricating oil to the moving parts.
Due to reduced load
Reduce the structural mass, prolong the service life of the machine, and reduce the fatigue of the workers on the machine; the operation is simple, and it is easy to realize automatic control
System; due to the relatively high average efficiency of continuous action, its quality is smaller than that of the LS type screw conveyor of the same productivity. If you have any questions after reading the above, please call our hotline, sincerely for
Your service to solve the puzzle. For more information on roller conveyors, unpowered roller conveyor lines and conveyor lines, please visit our official website.