Depend on if there is a loading bay in the warehouse.For FACTORY WITH LOADING DOCK , our standard telescopic belt conveyor is the best option. It is used to be fixed on the loading bay and can extend into/out the end of container. With adjustable height and speed, the telescopic belt conveyor is the most popular loader these years.Fixed Telescopic Belt ConveyorMobile Telescopic Belt ConveyorFor FACOTYR WITHOUT LOADING DOCK, there are two options:Dockless Telescopic Belt ConveyorDockless Loading Conveyor

HOW TO SET UP?Safety Information:①　Conveyor is very heavy. Assembly required more than two people to prevent injury.②　Do not put hands on scissor supports.③　Clean the conveyor regularly to maintain the lifespan.④　Do not overload.Max.capacity 40kg per linear meter.⑤　Keep the casters breaks down while in use.⑥　Do not stand up on top of the unit.⑦　Conveyor is not a toy.Not for use by children.Step 1：Lay conveyor body upside down on a level surface.Loosen all set screws with hex key provided.Step 2：Insert leg supports into sockets making sure threaded bosses are facing same directionStep 3：Retighten all set screws with hex key provided.Step 4：Insert caster leg assemblies into leg supports.Step 5：Insert and tighten all knobs into caster posts.Step 6：To install box stop loosen and remove hex nuts, washers and axle rod. Attach box stop handle to end of conveyor. Insert axle rod. Replace washers and retighten nuts with box wrench provided.Step 7：Set pitch and height as required by adjusting caster leg up or down.To use the handle as a box stop,lift the horizontal bar and hook it to the top rod.

●  The flexible roller conveyors have a bigger load capacity than the standard flexible skate wheel conveyor.●  With the same length,width,height,the standard flexible skate wheel conveyor is more economical than gravity roller units and makes the goods moves smoother.●  Double roller conveyor type makes the goods move smoother and more fluent than the single roller type.●  Any items with an uneven or open buttom,or with a rim on the bottom should be transported on rollers.●  Conveyed items can be wider than the conveyor.Extra wide items like plywood or sheet materials can be moved if carefully centered.●  Typically,3 rollers or 3 skate wheel lines must be beneath the load at any particular time for easy rolling

Automatic trailer/van/truck/container loading and unloading conveyor is quite welcome to automatically load or unload goods in and out of trailers /vans/ trucks/containers in warehouse, harbor, airport, dock, etc. It solves the problems of no shipping docks when loading or unloading. The mechanized operation largely increases work efficiency, relieves labor intensity and also reduces cost for modern enterprises in a wide range of applications. It facilitates goods handling work and also provides advantages to advanced production, modernized management and safe operation.Auto loading/unloading on ground floor: get it done to stuff a 40ft container in ONE hour with THREE employees only ! FeaturesThe conveyor consists of two parts: FLEXIBLE TONGUE (three types optional) & UPGRADING CONVEYOR, which can both work independently.The conveyor is easily movable;Its end can be extended with other flexible conveyor so as to reach closer to the target goods;Either type of flexible “tongue” can be lifted up to a certain height and extended towards target goods; Controlled by one electric box, it can be right started or stopped and run forward or reverse at will;It can be applied as a horizontal conveyor line when the tongue is not lifted. Model List● 7.2m flexible motorized tongue ( Model: CBLC-600 )● 4.2m flexible motorized tongue ( Model: TLC-P600 )● 2m flexible motorized tongue ( Model: TLC-S600 )● 6.9m flexible gravity tongue ( Model: TLC-G600 )● no tongue ( Model: TLC-600 )● Foldale type without tongue ( Model: TLC-F600 )● Auto walking type ( Model: TLC-W600 )● With person operate plateform ( Model: TLC-L600 )